Kluber PARALIQ GTE 703 NSF H1 EPDM Sealing Grease
Kluber PARALIQ GTE 703 500g NSF H1 EPDM Sealing Grease
Kluber PARALIQ GTE 703 500g NSF H1 EPDM Sealing Grease
Kluber PARALIQ GTE 703 is a high-performance synthetic lubricating grease specially developed for valves, fittings and sealing applications with EPDM elastomers. Based on silicone oil and PTFE, this specialty lubricant provides reliable lubrication and sealing protection in food processing, beverage, pharmaceutical, cosmetic and animal feed equipment.
As an NSF H1 sealing grease, Kluber PARALIQ GTE 703 is designed for applications where incidental contact with food or packaging materials may occur.
Excellent EPDM Compatibility
One of the key advantages of EPDM sealing grease is its compatibility with EPDM seals and other components used in valves, fittings and dispensing equipment. Kluber PARALIQ GTE 703 helps reduce friction and wear on sealing surfaces, supporting longer seal service life and helping minimize leakage, maintenance and unplanned downtime.
The grease is particularly suitable for applications involving water, hot water, steam, disinfectants and cleaning agents. Its resistance to these media makes it a practical choice for equipment that is frequently cleaned or exposed to demanding operating conditions.
Food Grade Lubrication for Valves and Fittings
Kluber PARALIQ GTE 703 is widely used as a food-grade lubricant for valves, fittings, taps, seals and dispensing equipment. It is suitable for food and beverage processing machinery as well as pharmaceutical and cosmetic production equipment where hygienic lubrication is required.
As an NSF H1 sealing grease, it can be considered for lubrication points where incidental food contact is possible. Proper lubricant selection and application should always be based on the specific equipment, operating conditions and applicable hygiene requirements.
The silicone oil and PTFE formulation also provides the characteristics expected from a food grade silicone grease, including reliable lubrication and good resistance to water and cleaning media.
Applications
Typical applications for Kluber PARALIQ GTE 703include:
- EPDM seals and O-rings
- Valves and fittings
- Beverage dispensing systems
- Food processing machinery
- Filling and packaging equipment
- Pharmaceutical processing equipment
- Cosmetic production machinery
- Taps and sanitary equipment
- Low-load rolling bearings in beverage equipment
- Equipment exposed to water, steam and cleaning agents
For beverage applications, the lubricant is especially useful where an EPDM-compatible H1 lubricant is required. It can also be used on very low-load rolling bearings operating at slow speeds.
Operating Temperature and Technical Characteristics
Kluber PARALIQ GTE 703 has a service temperature range of approximately -50°C to 150°C. It is a white, homogeneous grease with an NLGI consistency of approximately Grade 3. The product uses silicone oil as the base oil and PTFE as the thickener.
The combination of silicone oil and PTFE gives this EPDM sealing grease good resistance to water, steam, disinfectants and cleaning agents. This makes it suitable for demanding hygienic environments where conventional lubricants may not provide sufficient resistance.
The product is available in a 500g cartridge, making it convenient for maintenance, servicing and professional industrial lubrication applications.
Why Choose Kluber PARALIQ GTE 703?
Kluber PARALIQ GTE 703 can help simplify lubricant management because one lubricant can be considered for both sealing applications and selected low-load bearing applications. Its NSF H1 registration, EPDM compatibility and resistance to water and cleaning media make it a suitable solution for hygienically sensitive production environments.
For customers looking for NSF H1 sealing grease, EPDM-compatible valve grease or a reliable food grade silicone grease, this product provides a specialized solution for food, beverage, pharmaceutical and other hygiene-sensitive industries.
The 500g package is suitable for industrial maintenance, equipment servicing and regular lubrication of valves, fittings and sealing components.
Product : Kluber PARALIQ GTE 703
Package :500g
Base Oil : Silicone Oil
Thickener :PTFE
NLGI Grade :3
Color :White
Service Temperature : -50°C ~ 150°C
Main Application : Valves, fittings, EPDM seals and low-load rolling bearings
