XYC TP 39-311 A/B 1KG PTFE Dry Film Coating

XYC TP 39-311 A/B 1KG PTFE Dry Film Coating

Product Overview

XYC TP 39-311 A/B is a two-component PTFE dry film coating designed for sliding components that require friction control, wear resistance and clean lubrication. This PTFE dry film coating is supplied in liquid form and forms a black solid lubricating film after application and curing.

As an automotive anti squeak coating, it helps reduce friction noise and stick-slip movement in selected automotive mechanisms. The cured film also functions as a wear resistant coating for suitable contact surfaces.

Key Benefits

Friction and Noise Control

The PTFE dry film coating helps reduce friction between moving surfaces and supports smoother component movement. Its anti-stick-slip properties make it suitable for applications where squeaking and vibration-related noise are concerns. As an automotive anti squeak coating, it can be considered for selected window, sunroof and sliding mechanisms.

Dry Lubrication and Wear Protection

After curing, the coating forms a dry lubricating layer rather than an oily surface. This PTFE dry film coating can help limit lubricant residue and dust accumulation while providing wear protection. The resulting wear resistant coating is intended for components requiring long-term lubrication and reduced maintenance.

Corrosion Protection

The supplied description indicates that the coating also provides corrosion protection and adhesion to steel and aluminum substrates. This wear resistant coating may be suitable for selected metal components when surface preparation and compatibility requirements are met.

Typical Applications

XYC TP 39-311 A/B is intended for selected automotive and industrial sliding components. Potential applications include window mechanisms, sunroof assemblies, hinges, locks, sliding guides and metal-to-plastic contact surfaces.

For assemblies requiring noise reduction, this automotive anti squeak coating helps address friction-related squeaking and stick-slip. For components requiring a clean lubricating surface, the PTFE dry film coating provides dry-film lubrication without conventional grease residue.

Application Notes

The product is described as a two-component coating applied by spraying or dipping, followed by heat curing. Prepare the substrate properly and confirm the A/B mixing ratio, pot life, film thickness and curing schedule using the technical data sheet for the exact TP 39-311 A/B grade. The supplied description identifies a service temperature range of -40°C to +230°C; verify this range before specifying the product for an application.